The Brinks Commercial Keypad Entry Lever provides convenient keyless protection for your commercial space. This keypad leverset is perfect for entry doors or doorways where added security is needed such as; maintenance rooms, supply closets or member-only access areas.
- Keyless Access - Allows one 6-digit master code and ability to assign 99 (4-8 digit) additional user codes for tenants, members or trusted users.
- Worry-Free Vacation Mode - Temporarily deactivate all user codes to restrict access while you're away for added peace of mind.
- Automatic Relocking - automatically locks the door after entry or exit, default is 5 seconds.
- Adjustable auto lock delay range: 5 -90 seconds.
- Automatic Relocking can also be turned off to allow door to remain as passage function when needed.
- Meets ANSI Grade 2 standards
- 6-Pin SC4 Cylinder with brass plug
- T-strike and full lip strike are included.
- Operates with 4 AA alkaline batteries (not included)
- Features a low-battery indicator on interior handle.
- Backlit Keypad - Buttons become illuminated when pressed to allow easy code entry in nighttime or low-light situations.
- 3-3/4" solid zinc diecast levers that can be set for left or right handed door applications.
- No wiring required! Installation can be completed in minutes with basic hand tools.
- Fits doors 1-3/8" to 2" thick.
- Adjustable latch that fits 2-3/8" or 2-3/4" backset.
- 2 keys included
- Suitable for indoor or outdoor use.
- Operation temperature: -31 to 150.8 degrees Fahrenheit.
- IP Rating: None
- Competitive Warranty- This keypad entry lever is backed by a 10 year limited warranty.
Install troubleshooting:
The exterior & interior spindles are packaged in the neutral position (non-handed) with the lever catch facing down.
Both spindles must be set to the correct handed position in Step 6 before installation.
Trouble clicking lever catch into place?
6B(Right Hand Door) or 6D(Left Hand Door): Remove lever on interior side of door, rotate interior spindle 90 degrees until lever catch clicks into place and face away from door hinge. If issues with lever catch clicking in place, gently tap the catch.
Cannot remove key?
1.Confirm turn switch is not in the horizontal/programming mode position.
2. Confirm keyway orientation is correct.
3. Un-install and switch interior and exterior levers. Re-install.
Key will not lock when interior turn switch in vertical position?
Lever works as passage when interior turn switch in vertical or horizontal position before batteries are installed.
Programming Mode
Allows one 6-digit master code:
Comments
0 comments
Please sign in to leave a comment.